Time-honored state-owned enterprises join hands with "road home network" to build wooden house inns in Fuhan Wood Industry

Staff Report on the 24th, the reporter learned from Hubei old-name state-owned Enterprises Fuhan Wood Industry, the enterprise and accommodation sharing platform "road home network" cooperation, to build a number of Wooden House Inn.

The "Internet + Tourism" website has opened more than 650,000 online homes, including residential accommodation, covering 345 domestic destinations and 1,037 overseas destinations. On the 24th, Hubei Fuhan Green Construction Co., Ltd. signed a national strategic cooperation contract with Siweideng, a member of the Tujia Group, and became the latter's nationwide green building contractor.

It is reported that Fu Han for the road home design and manufacture of 200 shared farms, from the basic construction to the interior of the fastest as long as 45 days to complete. After signing a contract, a project will be located in Zhongxiang.

Hubei Fuhan Wood (Group) Development Co. , Ltd. is a large state-owned enterprise with a history of 60 years. Its subsidiary, Fuhan Green Building Co. , Ltd. , is engaged in the research and development, design, manufacture and construction of green wood construction. "The old state-owned enterprise Fu Han, innovation ability is very strong, does very well in the quality control" , the cooperation side introduction.

And in the choice of plate, for the multi-layer plywood and eco-board manufacturers products, when we buy, we must carefully observe its surface quality, but sometimes there will be wrinkles, which is why?

It is likely that at the time of production, the pulp has a high viscosity, foams, and large pieces of floating pulp, which are subjected to uneven forces at various places during the crushing process. It is also possible that the pulp has an excessive concentration, the fibers are clumpy and can not be evenly interwoven into plates, and the forces applied to various places during the crushing process vary. There may be too loose long net or Tett Mesh Plug, can not be very good dehydration, after the weight of the Strand of water after dehydration uneven, in the press when part of the fiber loss with the water. Another reason is that the speed of the propeller and the speed difference is too large, slab wrinkling or being pulled apart. Also pay attention to the flatness of the eco-plate, in the dark place 45 degrees angle to see the long side, whether there is uneven surface, see whether the surface stitching is obvious.