Use Characteristics of multilayer board storage

Multi-layer eco-board and multi-layer plywood manufacturers produce products which are mainly based on wood and decorated with impregnated paper with patterns and textures. They can be processed into furniture with different styles and fashionable appearance, commonly used in custom cabinets, wardrobes, bathroom cabinets and other products, the following we understand the use of features.

Because in the production process to reduce the painting process, save production costs, but also to improve the health and environmental performance of products, with a variety of colors and textures, consumers can choose the appropriate products according to the indoor decoration style, to meet the diverse needs of the decoration. In addition, the product also has the characteristics of dirt resistance, wear resistance and corrosion resistance, because in the production process, the raw materials were dried, and the bearing capacity of the internal structure of the wood material was improved, so that the vertical and horizontal direction of the product physical and mechanical properties of small differences in the use of bending or deformation is not easy to occur.

The problem of Slab layering may occur in the process of manufacturing sheets of multi-layer eco-boards. This is mainly due to the top-down or bottom-up velocity gradient of the propeller liquid during the process of dewatering, which leads to the separation and settlement of the fibers, and Not interweave very well.

If the pulp concentration is too high, and even if there is a situation of a paddle mass, the fibers can not interweave well, the foam is more, there will be a lot of slurry, the surface slurry can not interweave well with the fibers below, wILL LEAD TO MULTI-LAYER ECO-PLATE SLAB problems. The speed of the net is not consistent with the flow speed when the slurry goes to the net. The net is too loose and crawls, resulting in the slurry's speed gradient from top to bottom. For this, the tensioning device can be adjusted to ensure that the long net has enough pre-tension, it is necessary to control the slurry concentration reasonably.

In the process of multi-layer eco-board, it is necessary to avoid the situation that too much pulp is returned at one time, to release pulp, to achieve uniform flow as far as possible, the amount of pulp to keep the net speed consistent with the pulp speed.

Multilayer eco-plate manufacturers in the Mechanical Properties of the Board is very good, that is, its ability to resist external forces, so why in the processing of its hot pressing it?

The application of hot pressing technology can make the thickness of multi-layer eco-board more even and the surface more flat, thus improving the appearance and quality of products. In short, for multi-layer eco-plate, after hot-pressing the performance and quality of the plate is very good, so many manufacturers will use hot-pressing process to improve the performance of products. However, relative to some wood-based panels, this process is limited, because if the hot press effect is too large, it will cause unnecessary damage.

The production of multi-channel rigorous process, make multi-layer eco-board more perfect, the surface is very smooth, and high-grade texture, with high strength of practical beauty.

Multilayer eco-board this product, whether in appearance or practical, are very advantageous, so multilayer eco-board manufacturers what are the characteristics of production?

Generally speaking, the multi-layer eco-board is the use of high-quality Pine, Chinese fir as the main raw materials, the use of imported equipment Patchwork, fine technology, flat plate surface, any angle sawing are seamless. Moreover, it also utilizes advanced production technology and management system, as well as high-quality and high-strength environmental protection resin adhesive, bonding, and carefully selected high-quality fine wood raw materials as the base material. They have tight stitching, fine material, good finish, and strict production process, thus can make the product guarantee the long-term stability.

This not only guarantees the multi-layer eco-plate processing technology, but also pay attention to the quality of the product performance, so this product or a very competitive market advantage.

Multi-layer eco-plate manufacturers in the process of processing plates, it is likely that carving process, what should be the specific attention?

In general when carving, need to add some glue on the surface of the board, the main reason for doing so is to reduce the probability of errors in the board carving. Then we have to pay attention to speed, although there are some mechanical engraving, but whether it is mechanical or artificial, should be controlled speed, this is also in order to better reduce the damage caused by mistakes. After a certain degree of carving, but also need to be above the detritus cleaning, increase the visibility, in the cleaning time to pay attention to get some water, save the board to wear, but also reduce the dust pollution.

In addition, in order to better ensure the smooth degree of plate carving, to control the water content of the board, too high easy from the wire, too low will appear cracking.